B&B Electronics ESR901 - Manual (Page 62)

Upgrade Mode
52 Chapter 8 Manual Documentation Number: ESR90x-0508m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Upgrading the Firmware
Step 5: Double-click the Firmware Upgrade icon (or click the Server menu
and
Firmware Upgrade
)
Step 6: In the Upgrade
window, click
Browse
. The
Open
dialogue box will
appear. Locate the folder on your PC that contains the firmware .hex
file.
Select
the file and click
Open
. The Open dialogue box will
disappear.
Step 7: In the Upgrade window select the serial port to be used in
transferring the firmware.
a. If connected directly from the PC to a Serial Server port it
will typically be COM1 or COM2
b. If using a virtual COM port to upgrade via the network,
identify the virtual COM number and address mapped to
Port 1 on the Serial Server.
Step 8: Click Upgrade
Step 9: In the Port Settings
window set the
Bits per second
,
Data bits
,
Parity
and
Stop
bits to the same values as set up in the
Server
Properties window. Click OK.
Figure 37. The Port Settings Window
Step 10: Upgrade progress
will be shown until the
Upgrade finished!
message is shown. Click
OK
.