Arkon SM015-2AMPS - Manual

Package Contents:
(1) SM015-2 - Universal Phone Cradle
(1) AP032 - Dual-T to 4-hole AMPS adapter plate with screws and nuts
!
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
The Mobile Mounting Specialists™
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
Do not place mount in or near an air bag deployment zone. !
Console Mounting VSM Bracket
Connect Adapter plate AP032 to VSM Bracket
Step 1.
Step 1.
SM015-2AMPS | VSM 4 Hole AMPS Adapter Mount with Universal Phone Cradle
AP032
Dual-T to 4-hole
AMPS Adpter plate
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in Taiwan
© Copyright 2010 Arkon Resources, Inc.
Find a safe location on the console to install the vehicle
specifi c mount (VSM) sold by other manufacturers. The VSM
bracket is not included in this kit. Follow the manufacturers
instructions for installing VSM bracket.
Place the Dual-T to 4-hole AMPS adapter plate against the
VSM bracket. Using a screwdriver, tighten the screws into
the nuts behind the adapter plate. See diagram below.
Connect the Dual-T slots (A) on the back of the phone cradle to
the Dual-T tabs (B) on the Dual-T to 4-hole AMPS adapter plate. Step 1.
Step 1.
Connect Mobile Phone Cradle to VSM Mount
Patented
B
A
SM015-2
Universal
Phone Cradle SM015-2
Univers
Phone C
Insert your phone or device into the cradle with the device
sitting on the adjustable support legs (C). Squeeze the
grip arms (D) inward to fi rmly grasp the device. Press the
release button (E) to open the arms.
Device Insertion and Removal from Cradle
C
E
D