Black Box GEH-6510 - Manual (Page 49)

46 •••• Chapter Four - Menus and Toolbars DDE Server User’s Guide
The Configured Virtual Ports box lists all the ports available to be configured with
proper Ethernet addressing information. Each port represents a physical device on the
Ethernet network. The ports are named NetCOM1 through NetCOM256; these names
cannot be altered.
To change the characteristics of a previously configured port, select it and click
Modify. Select an existing port and click Delete to delete the configuration
information for a virtual port.
Clicking on Add displays the Add Virtual Port dialog box, shown below. (Clicking
on Modify brings up the same dialog box with the selected port’s characteristics
displayed for your review and/or modification. Also, the Virtual Port selection pull-
down list is disabled in the Modify command.)