Broan RP2 - Manual

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
70E 99044081A
TYPICAL SPECIFICATION
Range hood shall be Broan RP2 Series.
Unit shall have a backdraft damper and be ducted
vertically (horizontally) to the outside.
Unit shall have washable micromesh aluminum filters with
special Microban ® coating.
Unit shall have a permanently lubricated, dual centrifugal
blower resiliently mounted and controlled with a two-speed
control. RPM not to exceed 1625.
Hood shall have a two-speed rocker control and a
separate, two-position light switch. Sides shall be straight
and bottom hemmed - with no sharp edges. Stainless steel
shall be 24-gauge, 430 series.
Air delivery shall be no less than 440 cfm and sound levels
no greater than 7.0 Sones. All air and sound ratings shall
be certified by HVI.
Unit shall be U.L. and cU.L. listed.
Designed to meet the performance needs of
today's conventional cooking appliances.
FEATURES
•
Two-speed blower control, convenient color-matched
rocker
•
Two-position light switch for "bright" or "night-light"
illumination
•
Dual halogen lamps with stainless steel trim rings
(50W GU10 - MR16 lamps, purchase separately)
•
High efficiency dual centrifugal blower with resilient
anti-vibration motor mounts
•
Broan Heat Sentry TM - automatically turns blower to
high speed when excess cooking heat is detected
•
Two washable, micromesh aluminum grease filters with
Microban ® coating that inhibits the formation of odor-
producing bateria and protects filter from discoloration
•
Hemmed bottom for safety and good looks
•
Damper/duct connector included
•
Professional styling in Stainless Steel, Black and White
•
Available in 30" and 36" widths
•
Non-Ducted Recirculation Kit - NDK358 Series
- Order to match color and size of hood
•
Replacement filters (package of 2):
- Grease with Microban - 97017456 (BPAPFA)
- Grease without Microban - 97017455 (BPRPFA)
- Non-Ducted - 97007662 (88F)
SPECIFICATIONS
MODEL RP2 SERIES
PRO-STYLE
RANGE HOOD
SONES CFM
VOLTS AMPS RPM VER. HOR. VER. HOR. DUCT
120 7.0 1625 7.0 7.0 440 440 3¼" x10"
HVI-2100 ceRTIfIed RaTIngs comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute, for
off-the-shelf products, as they are available to
consumers. Product performance is rated at 0.1
in. static pressure, based on tests conducted in
aMca’s state-of-the-art test laboratory. sones
are a measure of humanly-perceived loudness,
based on laboratory measurements.
NDK358 SERIES
NON-DUCT
RECIRCULATION
KIT
RP2 SERIES
PRO-STYLE
RANGE HOOD