Broan QTR070 - Manual (Page 4)

Page 
MODEL QTR070
SERVICE PARTS
99044095C
Key No. Part No. Description
1 97016466 Housing
2 97016449 Duct Connector-4”
3 98010102 Wiring Plate
4 99170245 Screw, #8-18 X .375
5 97018010 Wire Panel/Harness Assembly
6 97016621 Blower Assembly
7 97017642 Grille Assembly
(includes key no. 8)
8 99140199 Grille Spring (2 req’d)
9 97018014 Spacer (2 supplied)
10 99420665 Thumbscrew, #8-18 x .375
INSTALL GRILLE
7. Attach grille
to housing.
Squeeze grille
springs and insert
them into slots on
each side of hous-
ing.
8. Push grille
against
ceiling.
6. Finish ceiling.
Install ceiling material. Cut out around housing.
Order service parts by “Part No.” - not by “Key No.”
Replacement parts can
be ordered on our web-
site. Please visit us at
www.broan.com
SERVICE NOTE
To remove Blower
Assembly:
Unplug motor.
Remove
thumbscrew (10)
from motor plate
flange.
Find the single TAB
on the motor plate
(located next to the
receptacle).
Push up near motor
plate tab while
pushing out on side
of housing. Or insert
a straight-blade
screwdriver into slot
in housing (next to
tab) and
twist screwdriver.