Brother DCP 8080DN - Manual (Page 5)

5
4
Release the scanner lock
a
Push the lever a in the direction shown to
unlock the scanner.
(The gray scanner lock lever is located at the
back left side, under the document cover
b .)
5
Connect the power cord
a
Make sure that the machine power switch is off.
Connect the AC power cord to the machine.
b
Plug the AC power cord into an AC outlet. Turn
the power switch on.
6
Choose your language
(If needed)
a
Press Menu.
b
Press 1.
c
Press 0.
d
Press or to choose your
language.
Press OK.
e
Press Stop/Exit.
7
Set the LCD contrast
(If needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a
Press Menu.
b
Press 1.
c
Press 5.
d
Press to increase the contrast.
—OR—
Press to decrease the contrast.
Press OK.
e
Press Stop/Exit.
IMPORTANT
DO NOT connect the interface cable yet.
Note
If Scanner Locked appears on the LCD,
immediately release the scanner lock and press
Stop/Exit. (See Release the scanner
lock on page 5.)
2
1