ScyTek Electronics ASTRA 300RS - Manual (Page 3)

Astra 300RS - Page 3
Remote Transmitters
Remote Transmitter Description
The Astra 300 is supplied with two 4-button Remote Transmitters used to control system operations.
Button 1 Locks the doors and when held for 2 seconds, activates the system’s Panic feature. Button 1
also locks the doors when the system is in Valet Mode.
Button 2 Unlocks the doors.
. Button 2 also unlocks the doors when the system is in Valet Mode.
Button 3 Activates the Auxiliary 1 output. This output will remain on for as long as the button is pressed.
Button 4 Activates and deactivates the remote start.
Jumper Selection
Carefully separate the top and bottom halves of the main unit case. Once the cover is removed, the parking
light polarity jumper will be visible next to the parking light relay. Set the jumper for the correct polarity
output as described below, then reassemble the main unit case.
Parking Light Output. Selects the polarity (+/-) for the output of the on-board Parking Light relay.
Left Pin and Center Pin = negative
Right Pin and Center Pin = positive
Button 1 Button 2
LED
Button 3 Button 4