Water pitcher components, Filter change instructions, Pitcher storage and maintenance – Water Inc Water Filtration Pitcher User Manual

Page 2

Advertising
background image

W-961 Rev. 6-09

Distributed Internationally by Water, Inc.

1044 East Del Amo Blvd.

Carson, CA 90746

800.322.WATER (9283)

www.bodyglove.waterinc.com

®

Lid

Pistol-Style Handle

Pitcher

Hinged

Pour Spout

Reservoir

Filter Pack

Hinged Lip

To change the filter pack, simply unscrew it from the water reservoir, and insert a new pack following the same

instructions as found in “pitcher instructions before use.”

FILTER CHANGE INSTRUCTIONS

Water Pitcher Components

PITCHER STORAGE AND MAINTENANCE:

When the pitcher will not be used for an extended period of time (90-days or longer), flush the filter pack by

adding one tablespoon of chlorinated bleach to about one-half gallon of water, which is the capacity of the top

reservoir.
Remove the reservoir and filter pack assembly, and place on a paper towel to dry. Re-assemble and stow until

ready for re-use. It is recommended to periodically clean the pitcher reservoir with mild detergent.

For any service related questions, contact Water, Inc. at 1-800-322-WATER (9283), extensions 115 or 132. To

locate a dealer who carries replacement filters or to purchase online, please visit www.waterinc.com.

Lid with Hinged

Pouring Spout and Lip

Water Reservoir

Filter Pack Flushing

Assembly

Filter Pack

(C)

(B)

(A)

(E)

Advertising