Bissell 6592 - Manual (Page 6)

6
Powerfoot Height Adjustment
1.
2.
3.
The powerfoot/Rotating floor brush on your bissell vacuum can be adjusted to
clean several floor surfaces.
NOTE: For optimal cleaning performance, adjust to the lowest
practical setting. If your cleaner is difficult to push, adjust to
the next higher setting.
Place Handle in Upright Position.
Turn Floor Surface Selector to desired setting.
Lowest Setting - For bare floors.
Medium Settings - For short and medium pile carpets.
Highest Setting - For plush pile carpet.
Place the Handle into the Normal Cleaning position and the Powerfoot will
adjust to the setting chosen.
NOTE: You may also adjust the setting while in the Normal
Cleaning Position.
your bissell vacuum is not only a powerful carpet and rug vacuum cleaner, it’s
also a versatile above floor vacuum when you select one of the special tools.
Raise Handle to Upright Position.
Grasp the Quick Reach Handle and lift up to separate from suction
intake opening.
Attach tools by firmly pushing onto Hose Wand or Extension Wand.
Combination Upholstery/Dusting Brush Tool:
Two types of cleaning tools are included in one attachment: rotate for desired tool.
■ Use Brush side to dust furniture, blinds, books, lamps, shelves.
■ Use Upholstery side for curtains, draperies, cushions, fabrics.
Crevice Tool:
Use in tight narrow spaces.
Extension Wand:
Use with desired attachments for a longer reach.
TurboBrush (Select Models):
Use rotating brush action for small areas such as stairs and upholstery.
Note: Press gently when using the TurboBrush to gain
maximum cleaning. Too much pressure will cause the
brush to stop rotating.
Stair Cleaning Tool (Select Models):
Use for stairs, area rugs, and other small carpeted area. This tool can also be used
for bare floors.
All items may not be included with your model. More tools are
available; to order please refer to page 11.
6A
7
CAUTION:
The Rotating Floor Brush continues
to rotate while tools are in use. To
reduce the risk of injury from moving
parts, always move the vacuum with
the Carrying Handle at the back of the
vacuum. Always place vacuum on floor
with Handle in Upright position when
using tools. Never place your fingers
under the vacuum when it is running.
Never place Powerfoot on furniture or
uneven surfaces. Do not place vacuum
close enough to objects to pull them
into rotating brush.
Special Tools
1.
2.
3.
Tip:
Hair, string and small
objects can block
the Vacuum Hose
or Tools. Check
them occasionally
for obstructions. See
Troubleshooting
Guide for instructions.
NOTICE:
The Floor Brush will continue to rotate while
you use your vacuum for above floor cleaning.
To prevent carpet damage, do not lean on the
vacuum or let the Powerfoot tilt forward.