Braun 6550 - Manual (Page 2)

3
Our products are designed to meet the highest
standards of quality, functionality and design.
We hope you entirely enjoy your new Braun
shaver.
Caution
• Do not use the shaver near, or over, basins filled
with water (e. g. bath tubs, showers etc.).
• For safety reasons, periodically check the cord for
damage and replace it, if it is loose in the shaver
socket.
1 Description
1 Foil protection cap
2 Triple shaving frame
3 Duo cutter block
4 Release button
5 Long hair trimmer
6 Switch
7 Switch lock
8 Function display
9 Shaver socket
2 Charging the shaver
• When charging the shaver for the first time,
connect it to the mains and charge it for at least
4 hours (switch position «0»). Then shave without
the cord until the red light on the function display
starts flashing
• Subsequent charges will take approximately
1 hour.
• Wattage: 6 Watts
Voltage range during charging: 12 - 240 V ȃ /
50 or 60 Hz (automatic adaption).
Best environmental temperature range for
charging: 15°C to 35°C
3 Function display
The function display shows the operation and
charging conditions of the shaver. It consists of the
LCD display, a green and a red light.
2
English