BevLes Proofer/Holding Cabinet PHC23-AR10 User Manual
Page 3
!
!
WARNING:
Never clean any electrical unit by immersing it in water. Turn off before cleaning
surface.
!
!
WARNING:
An earthing cable must connect the appliance to all other units in the complete
installation and from there to an independentearth connection.
!
!
NOTICE:
This product is intended for commercialuse only. Not for householduse.
!
!
WARNING:
-
SHOCK HAZARD
De-energize all power to equipment before cleaning the
equipment.
!
!
NOTICE:
The unit when installed, must be electrically grounded and comply with local codes, or in
the absence of local codes, with the national electrical code ANSI/NFPA70- latest edition.
Canadian installation must comply with CSA-STANDARD C.22.2 Number 0 M1982 General
Requirements-CanadianElectrical Code Part II, 109-M1981-CommercialCookingAppliances.
!
!
NOTICE:
Local codes regarding installation vary greatly from one area to another. The National
Fire Protection Association, Inc. states in its NFPA96 latest edition that local codes are Authority
Having Jurisdiction when it comes to requirement for installation of equipment. Therefore,
installation should comply with all local codes.
!
!
WARNING:
-
SHOCK HAZARD Do not open any panels that require the use of tools.
IMMEDIATELY INSPECT FOR SHIPPING DAMAGE
All containers should be examined for damage before and during unloading. The freight carrier has
assumed responsibility for its safe transit and delivery. If equipment is received damaged, either apparent
or concealed, a claim must be made with the delivering carrier.
A) Apparent damage or loss must be noted on the freight bill at the time of delivery. It must then be signed
by the carrier representative (Driver). If this is not done, the carrier may refuse the claim. The carrier can
supply the necessary forms.
B) If concealed damage or loss is not apparent until after equipment is uncrated, a request for inspection
must be made to the carrier within 15 days. The carrier should arrange an inspection. Be certain to hold all
contents and packaging material.
Installation and start-up should be performed by a qualified installer who has thoroughly read, understands
and follows these instructions.
3
TABLE OF CONTENTS
ITEM
PAGE
Safety Precautions
2
General Information
2
Operating Instructions
4
Maintenance
4
Service
4
Warranty Information
4
Specifications
5
Wiring Diagram
5
Parts List & Exploded Views
6
Warranty
11