Brother HL 5370DW - Manual (Page 60)

Wireless configuration for Windows ® using the Brother automatic installer application (For HL-5370DW)
50
4
Note
To confirm the wireless setting is enabled, check the text to the right of IEEE 802.11b/g in the Node Type
section on the Network Configuration page. Active means that the wireless setting is enabled and Inactive
means that the wireless setting is disabled. If the wireless setting is disabled, press the Go button for 10
seconds again.
k
You need to temporarily change your computer’s wireless settings. Follow the on-screen instructions.
Make sure you take notes on all the settings such as SSID, channel, authentication and encryption of
your computer. (See your note on page 46.) You will need them to return your computer back to its
original wireless settings, and then click Next.