Bissell Big Green 1672 series - Manual (Page 11)

11
Attach one of four dry vacuuming tools.
Insert tank siphon tube in tank unit.
Turn on vacuum/suction switch. Vacuum as usual.
Empty collection tank when it is half full.
See PUTTING IT AWAY, page 12.
Remove dry filter bag from ball cage.
Place ball on raised area on bottom of tank unit.
Position ball cage over ball and press firmly onto
raised area.
Insert tank siphon tube in tank unit.
Attach bare floor tool to floor nozzle.
Turn on vacuum/suction switch. Do not turn on pump/spray switch
or pump damage may occur.
Place Big Green in a dry area of the floor.
Vacuum as usual.
If the machine loses suction and/or motor noise rises in pitch, empty
the tank [see WHEN YOU’RE DONE]. Failure to empty tank will
damage unit.
See WHEN YOU’RE DONE, page 9 and PUTTING IT AWAY, page 12.
7.
8.
9.
10.
11.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
How To Dry Vacuum
How To Wet Vacuum
Vacuum/suction switch
Pump/spray switch
Tip:
Always check
motor filter
before dry
vacuuming.
Clean if
necessary.
Tip:
Clean water
spills can be
picked up from
surfaces direct-
ly. No cleaning
solution is
necessary.
Vacuum/suction switch
Getting Ready
Cleaning