Status messages – BenQ DX/S650 User Manual
Page 30
Troubleshooting
25
BenQ DX/S660 DX/S650 User’s Guide
Status Messages
On-Screen Messages
Description
SEARCHING
Projector is searching for input.
ACQUIRING SIGNAL
Projector has identified the input signal and is running the
auto image adjustment function.
OUT OF RANGE
Input signal frequency exceeds the projector’s range.
LAMP WARNING -
CHANGE LAMP AND
RESET LAMP TIMER!
The lamp has been in operation for 1400 hours. Install a
new lamp for optimal performance.
OUT OF LAMP USAGE
TIME. CHANGE THE
LAMP!
The lamp has been in operation for 1480 hours, and the
power will turn off after 20 hours.
OUT OF LAMP USAGE
TIME. YOU HAVE TO
CHANGE THE LAMP!
The lamp has been in operation for over 1500 hours. The
warning message will display for 30 seconds every 5 min-
utes after you turn on the projector and the power will
turn off automatically after 10 minutes.