Broan 112 - Manual

SPECIFICATION SHEET
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
KICKSPACE HEATERS
MODELS 112 & 114
Low-profile design provides floor-level heat from
out-of-the-way locations.
FEATURES
• Attractive white finish
• Vertical louvers – disperse heat evenly
• Front-mounted, snap action, bimetallic thermostat (Model
112 only)
• Heavy-duty, steel sheathed, plate-finned element
• Factory-wired for 240 VAC, 1500W
• Field-convertible to operate on 120 VAC, 750 or 1500W
• Mounts into standard kickspaces beneath cabinets, vanities,
counters, stairways, etc.
ACCESSORIES (purchase separately)
• Model 86W Line-Voltage Thermostat
• Model 59W / 59V 60 Minute Timer
• Model 61W / 61V 15-Minute Timer
• Model 90 Built-in Thermostat Kit (Model 114 only)
TYPICAL SPECIFICATION
The heater shall be Broan Model 112 (Model 114).
Unit shall have heavy-gauge steel housing and grille with
white finish.
Heater will have heavy-duty, steel-sheathed, plate-finned
element. Heater will have front-mounted thermostat (Model
112 only).
Heater to deliver 1500 watts of fan-forced heat from 240 VAC
circuit. It must be convertible to operate on 120 VAC, full or
half-wattage.
Heater shall be U.L. Listed.
Model 112
SPECIFICATIONS
SHIPPING
VOLTS WATTS AMPS BTU/HR WEIGHT
240 1500 6.2 5120
120 750 6.2 2560
12 lbs.
208 1125 5.4 3840
120 1500 12.5 5120
BOLD ratings are factory-wired.
01C 99041277E