4 3d, What you need, Watch 3d – Philips Cinema 219 Gold Series Smart LED TV 50PFL7956T 127 cm 50" Ultra wide screen Easy 3D with Ambilight Spectra 2 and Multi-view User Manual

Page 22: Optimal 3d viewing, Health warning, Cleaning and care

Advertising
background image

2.4 3D

What you need

To watch 3D on this TV, simply put on the 3D glasses. Two

pairs of passive 3D glasses are included.

For an extra pair of glasses order the Philips Passive 3D glasses

PTA426 or PTA416. The 3D performance of other 3D glasses is

not guaranteed.

Watch 3D

To start watching a 3D movie or programme, insert a 3D movie

into a 3D Blu-ray Disc player or tune to a TV channel that

broadcasts programmes in 3D.
Press

h (Home) and select the 3D Blu-ray Disc player or

select Watch TV and tune to the TV channel.

Start 3D

The TV can detect when 3D is available. When the 3D message

appears, select Start 3D and press OK. Put on the 3D glasses.

If the TV cannot detect the 3D signal (the 3D signal tag is

missing), the 3D programme is shown as a double image on

screen.

To switch the double image to 3D, press

t ADJUST, select 3D

and select Side by side or Top / bottom according to the double

image positions.

You might need to select the inverted format if the normal

format results in strange 3D effects.

Stop 3D
To stop watching 3D, press

t ADJUST and select 2D in the

3D menu.

You can also stop 3D when you switch to another channel or

connected device.

2D to 3D conversion

You can convert any 2D programme to watch it in 3D.
To convert a 2D programme to 3D, press

t ADJUST, select

3D and select 2D to 3D conversion.

To stop the 2D to 3D conversion, select 2D in the 3D menu or

switch to another activity in the Home menu. The conversion will

not stop if you switch between TV channels.

3D depth

You can change the depth of 3D for a weaker or stronger 3D

effect.
To set the 3D depth, press

t ADJUST and select 3D depth.

Use the slider bar to set the 3D depth and press OK.

Specifics

• If a 3D TV broadcast is switched to 2D, the TV shows only

the 3D-left picture.

• 3D is not available in Multi view

Optimal 3D viewing

For an optimal 3D viewing experience, we recommend that you:

• sit at least 3 times the height of the TV screen away from the

TV, but no further than 6 metres away.

• avoid fluorescent lighting (such as TL lighting or certain energy

saving light bulbs which operate on a low frequency) and direct

sunlight as they may interfere with the 3D experience.

Health warning

• If you or your family has a history of epilepsy or photosensitive

seizures, consult a medical professional before exposing yourself

to flashing light sources, rapid image sequences or 3D viewing.

• To avoid discomfort such as dizziness, headache or

disorientation, we recommend not watching 3D for extended

periods of time.

If you experience any discomfort, stop watching 3D and do not

immediately engage in any potentially hazardous activity (for

example driving a car) until your symptoms have disappeared. If

symptoms persist, do not resume watching 3D without consulting

a medical professional first.

• Parents should monitor their children during 3D viewing and

ensure they do not experience any discomfort as mentioned

above. Watching 3D is not recommended for children under 6

years of age as their visual system is not fully developed yet.

• Do not use the 3D glasses for any purpose other than

watching 3D TV.

• CHOKING HAZARD - Do not let children under 6 years of

age play with the 3D glasses, they could choke on the battery lid

or battery (if present).

Cleaning and care

• Do not expose the 3D glasses to direct sunlight, heat, fire or

water. This may result in a product malfunction or fire.

• Use a clean soft cloth (microfibre or cotton flannel) to clean

the lenses to avoid scratching them. Never spray cleaner directly

onto the 3D glasses. This may damage the electronics.

• Do not drop, bend or apply force to the lenses of the 3D

glasses.

• Do not use cleaning chemicals containing alcohol, solvent,

surfactant, or wax, benzene, thinner, mosquito repellent or

lubricant. Using these chemicals can cause discoloration or cracks.

22

Basics / 3D

Advertising