Black & Decker WV1400 - Manual (Page 6)

-6-
Clean the Vacuum Cleaner body with a damp cloth &
allow it to dry thoroughly before using it again. Do not
use any abrasives.
Fig. O - Cleaning the filter
The filter is re-usable and should be cleaned regularly.
The dust filter is located on the motor unit and protects
the motor from dust. To reach this filter, lift both latches
to the open position & lift the motor unit from its location.
Rotate the cap at the bottom of the filter in an anti-
clockwise direction & remove it. The filter can then also
be removed.
Clean the filter. Shake off excess dust by tapping the
filter into a suitable container. Attention: Dry vacuuming
must not be carried out without the dust filter fitted.
Warning! Do not use a brush or compressed air to clean
the filter.
Figs. O, T, & U - Changing the filter
The dust filter is located on the motor unit and protects
the motor from dust. To reach this filter, lift both latches
(8) to the open position & lift the motor unit (1) from its
location. Rotate the cap at the bottom of the filter in an
anti-clockwise direction & remove it. The filter can then
also be removed and a new one fitted.
Replace the motor unit & fasten the latches. Attention:
Dry vacuuming must not be carried out without the dust
filter fitted.
Hints for optimum use
When vacuuming stairs, always start at the bottom and
work your way up. Position the appliance on the floor
and do the stairs until halfway. Then carry the appliance
to a stable position which is at least one stair below your
working position, and do the top half of the stairs.
Carrying the appliance
During use the appliance can be carried using the
handle (2).
Fig. V - Storing the appliance
Warning! When storing the appliance, switch the
appliance off and unplug it. Make sure that the cord (3) is
correctly stored. Place the appliance in an upright
position. Always store the appliance in a dry location.
Clean the Vacuum Cleaner body with a damp cloth &
allow it to dry thoroughly before using it again. Do not
use any abrasives.
Maintenance
Continuous satisfactory operation depends upon proper
appliance care and regular cleaning. Clean the Vacuum
Cleaner body with a damp cloth & allow it to dry
thoroughly before using it again.
Do not use any abrasive or solvent-based cleaner. Do
not immerse the appliance in water. Regularly clean the
ventilation slots in your appliance using a soft brush or
dry cloth.
Warning! Before cleaning and maintenance, switch the
appliance off and unplug it from the electrical supply.
Helpful Hints
• Do not immerse the appliance, cord set or plug in
liquids.
• Do not block the vents.
• Avoid inhaling dust when emptying the dust bag.
• Always keep the brush, crevice tool and other
accessories away from the body while the unit is in
operation.
• Always empty the appliance outside.
• Use extra care when cleaning stairs. Always start at
the bottom stair & work up.
• Use caution when vacuuming at top of stairs, near
children, etc.
• Always be aware of the position of the power cable
and hose so as to avoid a tripping hazard during use.
• Do not use this appliance on animals.
• Disconnect the product from the electrical supply
before emptying, cleaning or carrying out any
maintenance on the appliance.
Technical data
WV1400
Voltage (Volts) 230
Power input (Watts) 1400 W. Max
Cable length (metres) 5.0
Carton size (litres) 405x400x500 mm
Weight (kilograms) 9 Kg
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further use to
you, do not dispose it off with other household waste.
Make this product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Use of recycled materials helps prevent
environmental pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal
waste sites or by the retailer when you purchase a new
product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage
of this service please return your product to any
authorised repair agent who will collect them on our
behalf. You can check the location of your nearest
authorised repair agent by contacting your local Black &
Decker office at the address indicated in this manual. A
list of authorised Black & Decker repair agents and full
details of our after-sales service and contact are
available on the Internet at: www.2helpU.com