Philips HD8752-87 - Manual (Page 47)

45 ENGLISH 45
2 Remove the Automatic Milk Frother from the steam/hot water wand.
3 Remove the “INTENZA+” water fi lter (if supplied) from the water tank if
it was installed.
4 Press the “ ” button. Press the “ ” button until the following
display is shown.
Y
ello
w
Red
5 Press the “ ” button to enter the descaling menu.
Note:
If you press the “ " button by mistake, press the “ " button to quit.
6 Remove the water tank and pour the entire content of the Saeco des-
caling solution. Fill the water tank with fresh water up to the MAX level.
7 Place the water tank back into the machine.
8 Place a large container (1.5l) under the steam/hot water wand and the
dispensing spout.