Philips BT2500B-37 - Manual (Page 6)

4 EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Charge the built-in battery
The speaker is powered by a built-in
rechargeable battery.
Note
• Before use, fully charge the built-in battery.
•
The micro USB socket is for charging only.
Connect the USB cable between
• the micro USB socket on the speaker, and
• a USB socket on your computer.
Battery indicator
The LED indicator on the top indicates the
battery status.
Indicator Battery
Solid red Under charging
Off Fully charged
Blinking red in Bluetooth
mode
Low power
5V A
Select a source or turn off
Switch the slider to select a source or turn off
this product.
• : Listen to an external Bluetooth device
through Bluetooth connection.
• AUDIO IN: Listen to an external device
through an audio input cable.
• OFF: Turn off this product.