Hyundai H-1412 - Manual (Page 5)

5
normal play.
Press the CD SKIP
button once to skip back to previous track. Keep pressing to skip the tracks at high speed backward. Release the button resume
normal play.
Repeat mode
Press the REPEAT button once for single track repeat playing.
Press twice for all track repeat playing.
To cancel repeat play, press REPEAT button until the repeat indicator turn off.
Program mode
Up to 19 tracks can be programmed for disc play in any order or the same track can be repeated up to 20 times. Before use, be sure to press the STOP
button.
Press the PROGRAM button.
Select a desired track by using the CD SKIP buttons.
Press PROGRAM button to confirm.
Repeat steps described above to enter additional memories into the program if necessary.
When all the desired tracks have been programmed, press PLAY/PAUSE button to play the disc in the order you have programmed.
To stop the CD, press the STOP button.
To remove the CD from the unit open the CD door.
To turn off the CD player set FUNCTION switch to TAPE position.
Note:
In the STOP mode press PROGRAM. The display shows your stored track numbers in sequence.
You can erase the contents of the memory by:
- opening the CD door
- selecting RADIO source
- pressing STOP button twice during playback or in the stop position.
MP3 operation
Set FUNCTION switch to CD position.
Lift the CD door at the edge marked CLOSE/OPEN. Put a MP3 disk into the CD compartment and close the CD door.
In MP3 playback mode all functions are available as in CD operation mode.
Note: Good quality sound is guaranteed only when playing licensed MP3 discs.