Helpful hints – Philips CCC194AT User Manual
Page 41
POWER
EJECT
SPEED MEMORY
CABLE
/DBS
COMBI
SMART
PICTURE
SLOW
F.ADV
INDEX
SKIP
SLEEP/
WAKE UP
1
2
3
4
5
6
7
8
9
0
CH.
VOL.
ALT.CH
REW
PLAY
F.FWD
REC
/OTR
PAUSE
/STILL
STOP
MUTE
TRACKING
VCR PLUS+
ENTER
SEARCH
VAR.SLOW
MENU
STATUS
/EXIT
FM
CLEAR
Timer Recording With the VCR Plus+ Programming System (cont’d) 41
• To exit the VCR Plus+ programming
system at any time, press the STA-
TUS/EXIT button. The display will
disappear from the screen.
• To stop a started timer recording,
press the STOP/EJECT button on
the TV/VCR.
Helpful Hints
4
Press the Number 1 button to record in SP speed or the
Number 2 button to record in SLP speed. Your selection
will appear to the right of REC SPEED on the screen, although
SP=1 SLP=2 will continue to flash. For details about tape speed,
see pages 30 and 64. You cannot use the SPEED button at this
time.
Turn off the TV/VCR for the
recording. Insert a tape in the
TV/VCR. Leave the Cable
Box/DBS on (if applicable).
5
Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED / PLEASE TURN OFF FOR TIMER RECORDING will
appear on the screen.
●
If there is not a tape in the TV/VCR, PLEASE INSERT CAS-
SETTE also appears on the screen.
●
If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on the screen. If this hap-
pens, insert a different tape.
6
Press the POWER button to turn off the TV/VCR power.
The Record light will flash slowly if a tape is in the TV/VCR.
If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR
TIMER RECORDING appears on the TV/VCR screen two minutes
before a timer recording starts. The Record light will blink rapidly
until you turn off the power for the recording.
ONE TIME PROGRAM
PROGRAM
1
CHANNEL
09
TIME ON
10:30 PM
TIME OFF
11:30 PM
REC SPEED
SLP
SP=1 SLP=2
START DATE
04/19/2001
THURSDAY
TO END PRESS EXIT
5
6
4