Operating elements and connections, Working with the uca202, Operating elements – Behringer Ultra-Low Latency 2 In/2Out USB/Audio Interface with Digital Output U-Control UCA202 User Manual
Page 5: And connections 4. working with the uca202
9
U-CONTROL UCA202 User Manual
8
U-CONTROL UCA202 User Manual
3. Operating Elements
and Connections
3.1 Front panel
LED
(1)
(2)
(3)
(4)
Fig. 3.1: Front panel UCA202
(1)
The LED indicates the status of the USB power supply.
(2)
DIGITAL OUTPUT: The Toslink jack carries an S/PDIF signal
which can be connected via a fiber optic cable, for example,
to the digital input of an effects device.
(3)
Use the jack to connect a standard pair of headphones
equipped with a �" TRS connector.
(4)
The VOLUME control adjusts the volume level of the
headphones output. Turn the control fully to the left before
you connect the headphones. This helps you avoid the
damage that is caused by high volume settings.
3.2 Rear panel
(5)
(6)
(7)
Fig. 3.2: Back of the UCA202
(5)
Use the LINE-OUT jacks for audio cables with RCA connectors.
(6)
Use the LINE-IN jacks for audio cables with RCA connectors.
(7)
The OFF/ON-MONITOR switch activates the monitor
function. In this case the input signal is routed directly to the
headphones output.
4. Working with the UCA202
4.1 Application example
HPS3000
Laptop
XENYX1204FX
TRUTH
B2031A
U-CONTROL
UCA202
Fig. 4.1: Common version with the UCA202