Connect/setup, Set up wi-fi connection between center and station – Philips WACS57-37B User Manual

Page 2

Advertising
background image

Set up Wi-Fi connection between Center and Station

Connect/Setup

Before starting the Wi-Fi connection, check

your Center and Station are away

from the source of interference, for example: turn off plasma TVs, microwave

ovens, DECT phones, bluetooth devices, cordless phones and other Wi-Fi
products.

The first time you set up the Wi-Fi connection, place
WAC5 Center and WAS700 Station side by side
on a flat and firm surface.

Connect WACS57 to power supply, first the Center and then the
Station
Center/Station: • The screen lights up. Auto installation/connection

starts

• You will enter HD (Harddisk) mode when the

installation/connection is finished

Center

AC

Station

AC

HD mode (Harddisk)

Relocate Center and Station as desired: plug and stream*
• Simply unplug your Center or Station and power them up in different

rooms.

• You will be able to stream the harddisk music between Center and

Station

IMPORTANT!
• Avoid thick walls. Separating your Center and Station by 2 or more walls

may cause poor streaming connection.

• For better Wi-Fi reception, you can turn the Wi-Fi antenna, or adjust the

location of your Center and Station.

: indicates maximum reception;

: indicates minimum reception

• For wall mounting, please refer to the User Manual, Appendix: How

to mount your Station onto walls. You may need assistance from
the qualified service personnel.

* Streaming is the process describing data is pulled between places, which

can be multiple places.

Advertising