Sleep to radio, Maintenence and care – Hyundai H-1005 User Manual

Page 5

Advertising
background image

5

· Insert a blank cassette with the tape-side up into cassette compartment.

· Press the PLAY button and RECORD button simultaneously to start recording.

· Press the STOP/EJECT button when finished.
NOTE:
You may want to monitor playback during recording. You can adjust the sound with the VOLUME control. This adjustment does not affect the
content of recording.

RECORDING WITH BUILT-IN MICROPHONE

· Slide the Function switch to TAPE position.

· Insert a blank cassette into deck with the tape-side up.

· Press the PLAY button and RECORD button simultaneously to start recording.

· Press the STOP/EJECT button when finished.
NOTE:
Monitoring during MICROPHONE recording is not possible.

SLEEP TO RADIO

· Set the function switch to "SLEEP".

· Insert any cassette into the cassette compartment as described above.

· Press the "PLAY" button of the cassette deck. The radio will turn on.

· Tune into the radio station of your choice.

· The radio will remain "on" until the end of the tape playing, and will switch off at that time automatically.

MAINTENENCE AND CARE

· Check your batteries regularly, old or discharged batteries should be replaced. If the unit is not going to be used for some time or is being

run exclusively on the alternative power, remove the batteries to avoid leakage and damage.

· Electronic products of this kind should never be subjected to moisture or extreme temperatures.

· If necessary, clean the unit with a piece of cloth dampened with water only (be sure the AC power cord is

disconnected from the power supply).

· The heads and capstan are in constant contact with the moving tape. Use a small cotton bud with alcohol or

special tape head cleaner to clean these parts. Never touch the heads with anything metallic.

Advertising