Bakers Pride GO-36 - Manual (Page 10)

Gourmet Oven Installation
8
9. Carefully lift the oven with the handles and place on top of other oven.
10. Seal the base and the stacking kit piece to the oven bottoms using silicone rubber RTV (S0018)
approved for this use.
11. Replace racks and drip pans.
Location and Clearance
Allow enough air space around the unit to provide for proper ventilation.
Wiring
Electrocution, equipment failure or property damage could result if an unlicensed
electrician performs the electrical installation. Ensure that a licensed electrician
perform the electrical installation.
The oven, when installed by an authorized BKI service agent, must be grounded in accordance with local
codes, or in the absence of local codes, with the National Electrical Code, ANSI NFPA 70-2002. You can
obtain this code from:
The National Fire Protection Association
Batterymarch Park
Quincy, MA 02269