Auto repeat, Recording, Recording & one-touch timer recording (otr) – Philips DVD-VCR Player DVP3355V User Manual

Page 16: Timer recording, Recordingg, Español français english, Accidental erasure prevention

Advertising
background image

Español

Français

English

– 16

EN

2

Press [B] to “AUTO REPEAT” to set “ON” or
“OFF”.

Press [SETUP] to exit.

Note(s):

• The auto repeat function can also be set “ON” or “OFF” by pressing [REPEAT] on the Remote Control.
• To cancel auto repeat function, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [SETUP] to exit.
• The auto repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the Stop mode.

1

Press [SETUP] and choose “AUTO REPEAT”.

- M E N U -

TIMER

PROGRAMMING

SATELLITE

LINK

B AUTO REPEAT [OFF]

CLOCK

SET

LANGUAGE

SELECT

or

Auto Repeat

When “AUTO REPEAT“ is set to “ON“, the cassette tape will automatically rewind and start over when it reaches the end.

This will continue until auto repeat function is turned off.

1

Press [SETUP]. Select “TIMER PROGRAMMING”.

TIMER PROGRAMMING

PROG

12345678

DATE

START TIME

END

TIME

L1/L2
REC SPEED

- M E N U -

B TIMER PROGRAMMING

SATELLITE LINK

AUTO REPEAT [OFF]

CLOCK SET

LANGUAGE SELECT

Available program number flashes.

2

Select an empty program number.

Then press [B] to go to next step.

PROGRAM NUMBER 1
DATE

– – / – –

START TIME – – : – – – –
END

TIME – – : – – – –

L1/L2

REC SPEED –

or

1

Insert a recordable

cassette tape.

2

Press [INPUT] until “L1” or “L2” is

displayed on the TV screen. Select “L1”

to activate rear input jacks. Select “L2”

to activate front input jacks.

3

Press [SPEED] to select the desired tape speed.

4

Press [REC I] until desired recording time is selected.

5

Press [C (STOP)] to

stop recording.

6

Press [OPEN/CLOSE A] to eject

the recorded cassette tape.

Recordingg

You CANNOT dub a DVD to a video cassette tape.

To stop recording temporarily (pause mode)

p

g

p

y (p

)

Press [F (PAUSE)].

• During the recording in pause mode, 5 C marks appear on the

TV screen. Each C mark represents 1 minute.

• Press it again to resume recording.

• Pause mode will be automatically cancelled after 5 minutes to

prevent damage to the cassette tape and the video heads.

Note(s):

• Do not change the External Tuner’s (Cable/Satellite or Converter

Set-top Box) channel while you are recording. You CANNOT watch one

channel while recording another channel at the same time.

• Connect your External Tuner (Cable/Satellite or Converter Set-top Box)

to the L1 (rear panel) jacks on this Unit. Connect camcorders and other

such devices to the L2 (front panel) jacks. Refer to page 11, 13.

This Unit has no tuner system so it cannot receive TV broadcasts without an External

Tuner (Cable/Satellite or Converter Set-top Box) or such devices.

Timer Recording

Accidental Erasure Prevention

To prevent accidental recording, remove erasure

prevention tab on the cassette tape. To record

on it later, cover the hole with adhesive tape.

Recording & One-touch Timer Recording (OTR)

Tape speed

Recording / playback time

Type of tape

T60

T120

T160

SP mode

1hour

2hours

2-2/3hours

SLP mode

3hours

6hours

8hours

Note(s):

• You can also set to External Tuner. Refer to “Satellite Link” on page 18.

TV

External Tuner

(Cable/Satellite or

Converter Set-top Box)

this Unit

6

2

3
4

1

6

5

REC

SP

erasure prevention tab

REC OTR (0:30) OTR (1:00).....

(normal recording)

OTR (8:00) OTR (7:30)

See note on the right.

• Insert a recordable cassette tape.

• Make sure to turn on the External Tuner (Cable/Satellite or Converter Set-top Box).

4

Continued on next page.

5

- M E N U -

TIMER PROGRAMMING

SATELLITE LINK

B AUTO REPEAT [ON]

CLOCK SET

LANGUAGE SELECT

Advertising