Philips SE7452B-37 - Manual (Page 34)

32 Advanced settings
scroll
:
to Registration and press
m
SELECT.
Note
If no action is taken on the handset within 10
seconds, the registration procedure will be
aborted. If this happens, please repeat Step 1.
Scroll
:
to select the base station to be
registered to and press
m
OK to confirm.
Enter the Master PIN when prompted and
press
m
OK to start registration.
• If the PIN is incorrect, Incorrect PIN will be
displayed and the handset returns to idle
mode.
Upon successful registration, a validation tone
is emitted and the screen returns to idle mode.
8.7 Select best Base Station
One handset can be registered to up to 4
different base stations. By default, the handset will
register to BASE 1. If you select
Best Base , the
handset will register to the nearest base station.
Press
m
MENU in idle mode, scroll
:
to
Advanced Set and press
m
SELECT, scroll
:
to Select Base and press
m
SELECT.
Scroll
:
to the desired base station and
press
m
OK to confirm.
• The handset will start to search for the base
station. If the selected base is found, a
validation tone is emitted.
8.8 Unregister a handset
Press
m
MENU in idle mode, scroll
:
to
Advanced Set and press
m
SELECT, scroll
:
to Unregistration and press
m
SELECT.
Enter the Master PIN when prompted and
press
m
OK to confirm.
Note
By default, the Master PIN is 0000.
Scroll
:
to select the handset number to
unregister and press
m
SELECT.
• A validation tone is emitted to indicate
successful unregistration and the screen shows
UNREGISTERED .
Note
If no action is taken on the handset within 15
seconds, the unregistration procedure will be
aborted and the handset returns to idle mode.
To unregister a handset that does not belong to
the SE740/745 range, you can only use the SE740/
745 handset to unregister it.
8.9 Change Master PIN
The Master PIN is used for setting call barring/
baby call number, registration/unregistration of
handsets and for accessing the answering machine
remotely. The default Master PIN number is
0000. The maximum length of the Master PIN is
4 digits. This PIN is also used to protect the
settings of your handset. Your handset will
prompt you whenever the PIN is required.
Note
The default pin code is preset to 0000. If you
change this PIN code, keep the PIN details in a
safe place where you have easy access to them.
Do not lose the PIN code.
Press
m
MENU in idle mode, scroll
:
to
Advanced Set and press
m
SELECT, scroll
:
to Change PIN and press
m
SELECT.
Enter the current Master PIN when
prompted and press
m
OK to confirm.
• The PIN entered will be shown as asterisks (*)
on the screen.
Enter the new PIN and press
m
OK.
Enter the new PIN again and press
m
OK to
confirm PIN change.
• A validation tone is emitted, the message
New
PIN Stored appears and the screen returns to
previous menu.
Note
If you forget your PIN, you will need to reset your
phone to its default settings. See next section
“Reset Unit” for more details.
8.10 Reset Unit
You can reset your phone to its default settings
with this feature.
Warning
Upon reset, all your personal settings, call log and
redial list entries will be deleted and the phone
3
4
5
1
2
1
2
3
1
2
3
4