Philips SE7452B-37 - Manual (Page 39)

37 Telephone answering machine (TAM)
10.1.2 Playback of old messages via
handset
Old messages can only be played if there are no
new messages. The first recorded message will be
played first and the next message will be played
automatically until there are no more messages.
Press
m
MENU in idle mode, scroll
:
to
Answer Machine and press
m
SELECT,
press
m
SELECT to enter Play menu.
Press
m
SELECT.
• The first recorded message will start to play
until the last recorded message.
During message playback, you can press
m
MENU to select the available options
(see options available under “Playback of new
messages via handset” on page 36).
10.2 Delete all messages
Note
Unread messages will not be deleted.
Warning
Messages deleted cannot be recovered.
Press
m
MENU in idle mode, scroll
:
to
Answer Machine and press
m
SELECT,
scroll
:
to Delete All and press
m
SELECT.
Press
m
OK to confirm deletion of all your
messages.
• A validation tone is emitted and the screen
returns to previous menu.
10.3 Memo recording
You can record a reminder message for yourself
or for anyone else who uses your answering
machine. The answering machine treats a memo
recording the same way it treats any incoming
message, and the new message indicator
will
flash accordingly. To play the memo recording,
please refer to “Play” on page 36
Press
m
MENU in idle mode, scroll
:
to
Answer Machine and press
m
SELECT,
scroll
:
to Record Memo and press
m
SELECT.
Press
m
START to start recording the
memo.
Press
m
STOP to end the recording.
• The recorded memo is automatically saved.
Press
>
BACK at any time to return to the
previous menu.
10.4 Set the Answer mode
There are 2 answer modes available: Answer
Only, and Answ. & Record.
By default, the answer mode is
Answ. & Record ,
by which your correspondent can leave a
message on the answering machine.
This can be changed to
Answer Only mode, by
which your correspond cannot leave any
messages on the answering machine.
Press
m
MENU in idle mode, scroll
:
to
Answer Machine and press
m
SELECT,
scroll
:
to Answ. Mode and press
m
SELECT.
Scroll
:
to Answ. & Record or Answer Only
and press
m
SELECT.
• The answer mode is set.
Scroll
:
to Personalised or Predefined and
press
m
SELECT.
• If you set your outgoing message as
Personalised , you can now proceed to record
your personalised outgoing message (see
“Record your Personalised Outgoing Message”
in the next section).
Note
Depending on the answer mode you have
selected, the appropriate default outgoing
message is played once the answering machine
picks up an incoming call. The language of the
default outgoing message depends on the country
selected in Welcome mode (see page 13).
10.5 Record your Personalised Outgoing
Message
This personal outgoing message replaces the
default ones. To revert to the default outgoing
message, simply delete the personal outgoing
message you have recorded. If you are not
satisfied with the recorded outgoing message,
1
2
3
1
2
1
2
3
4
1
2
3