Philips DVDR3390-37 - Manual (Page 23)

English
23
B A
Option 2: Using the VIDEO In jack
Use the CAM1 connection if your
camcorder has only a single video output
(Composite Video, CVBS.)
A Use a video cable (yellow plug – not
supplied.) Connect the CAM1 jack on
the front panel of the recorder to the
corresponding Video output jack on the
camcorder.
B Use an audio cable (red/white plugs) to
connect the AUDIO L/R jacks on the
front panel of the recorder to the audio
output jacks on the camcorder.
Step 2: Optional Connections
(continued)
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Front panel of
recorder
Option 3: Using the S-VIDEO In
jack
Use the S-VIDEO connection if you have
a Hi8 or S-VHS(C) camcorder. It
provides good picture quality.
A Use an S-Video cable (not supplied.)
Connect the S-VIDEO (Y/C) EXT2
jack on the rear panel of the recorder to
the corresponding S-VHS output jack on
the camcorder.
B Use an audio cable (red/white plugs) to
connect the AUDIO INPUT L/R jacks
on the recorder to the audio output jacks
on the camcorder.
Before you start operating, press REC
SOURCE on the remote control
repeatedly to select ‘CAM1’ as the input
channel, depending on your connections.
For details, see “Recording – RECORD
settings”.
R
L
VIDEO (CVBS)
EXT 2
S-VIDEO (Y/C)
INPUT EXT 1
AUDIO
TV-OUT ANTENNA-IN
L
R
B
A
Rear panel of
recorder
L
R
VIDEO (CVBS)
S-VIDEO (Y/C)
OUT 2
OUT 1
CAM1 L - AUDIO - R