Wall-mounting a featurephone – BT Versatility User Manual
Page 30
Advertising
BT Versatility
Installation and Maintenance Manual
29
Wall-mounting a Featurephone
The phone plinth is inverted on the base to wall mount the phone.
Locate, drill and plug the 2 screw locations as shown below. The holes should be deep enough to accept a
2.5 cm screw. Insert the two screws leaving sufficient space to clip the base over them. Locate the phone
and base over the screws.
150 mm
Line cord rails
V16 and Console in Wall Mount position
Featurephone in Wall Mount position
Advertising