B&K AVP 4090 - Manual (Page 29)

Page 27
  
 )
d


 
 
Save a preset
A preset will save the following information in a preset for you:
Master volume, selected input, input mode (analog, PCM, Dolby Digital, or DTS),
surround mode, rear volume, subwoofer volume, center channel volume, delay
setting, and display status of on or off.
To save a preset, press the SAVE button, followed by the preset number you wish to
overwrite (0-9 or A0-A9), then ENTER.
Example: If you want to save a setup for the preset 1 (CD), first recall the preset by
pressing 1 then ENTER.
Select the desired surround mode by pressing the MODE button until the
desired mode is displayed.
Next set the desired volume level:
Now save the preset by pressing SAVE:
Press 1:
Press ENTER to select and overwrite the displayed preset:
Your settings are now saved under preset 1 and any time you select this
preset your settings will be recalled.
Follow the same procedure for the other presets.