Manually update the channel list – Philips 32PFL7694H-12 User Manual
Page 38
37
8
When the correct channel frequency is
selected, press the Navigation buttons to
select [Done], then press OK.
The
»
[Analogue: Manual installation]
menu appears.
9
Press the Navigation buttons to select
[Store current channel] to store the new
channel under the current channel.
10
Press OK to confi rm your choice.
Manually update the channel
list
If your TV is in standby mode, an update is
performed every morning. This update matches
channels stored in your channel list with those
available from your broadcaster.
In addition to this automatic update, you can
manually update the channel list.
Tip
To disable the automatic update, in the
•
[Installation] menu, press the Navigation
buttons to select [Channel installation] >
[Channel update in standby], then select
[Off].
1
In the [Installation] menu, press the
Navigation buttons to select [Channel
installation] > [Automatic installation].
2
Press
OK.
A message appears with
»
[Start]
selected, prompting you to start the
channel update.
3
Press
OK.
The channel update screen appears.
»
4
Press the Navigation buttons to select
[Update channels].
3
Press:
The
•
Navigation buttons or Numeric
buttons to manually enter the
channel frequency.
The
•
Navigation buttons to select
[Search next], then press OK to
automatically search for the next
channel.
4
When the correct channel frequency is
selected, press the Navigation buttons to
select [Done].
5
Press
OK.
The
»
[Analogue: Manual installation]
menu appears.
6
Press the Navigation buttons to select
[Store current channel] to store the new
channel under the current channel; or
[Store as new channel] to store the new
channel under a new channel number.
7
Press
OK to confi rm your choice.
The channel is stored.
»
Fine-tune analogue channels
You can fi ne tune analog channels manually
when reception is poor.
1
When watching TV, select the channel to
fi ne-tune.
2
Press
( Home).
The home menu appears.
»
3
Press the Navigation buttons to select
[Setup].
4
Press
OK.
The
»
[Setup] menu appears.
5
Press the Navigation buttons to select
[Installation] > [Channel installation] >
[Analogue: Manual installation] > [Fine
tune].
6
Press
OK.
The
»
[Fine tune] menu appears.
7
Press the Navigation buttons or Numeric
buttons to manually enter the channel
frequency.
English
EN