Philips HTS9800W-37B - Manual (Page 22)

22
English
Step 1: Turning on the
DVD system
Press the SOURCE button on the DVD
system repeatedly to select :
DISC ¤ TUNER FM ¤ TV ¤ AUX
¤ DI ¤ DISC ....
Turning off to standby mode
Press STANDBY 2 on the remote
control.
The message “Standby” will be shown
on the display screen, and slowly fade
away.
Getting Started
Step 2: Finding the correct
viewing
channel
Before you start...
Make sure you have completed all
the necessary connections before
proceeding.
A Press the SOURCE button on the
remote control repeatedly until “DISC”
appears on the display panel.
B Turn on the TV and set it to the correct
video-in channel. You should see the
blue DVD background screen on the TV.
You may go to Channel 1 on your TV,
then press the Channel Down button on
your TV’s remote control until you see
the Video In channel.
You may press ° button repeatedly
on your TV’s remote control.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO. See your
TV manual for more details.
TIPS: Press b to return to the previous menu item.
Press
SYSTEM MENU to exit the menu.