Buffalo Technology DriveStation HD-HSIU2 - Manual (Page 4)

EN
2
Using TurboUSB 2
Fig: 2
Fig: 3
To use TurboUSB, you must fi rst enable it. From the Start menu, choose
Programs > BUFFALO > TurboUSB > TurboUSB for HD-HSIU2. (Fig: 2)
Click Enable and follow the instructions. (Fig: 3)
Once the wizard has completed you must disconnect the DriveStation by
clicking on the ‘Safely Remove Hardware’ icon in the systray (located
in the taskbar) (Fig: 5). Once indicated, remove and reattach the USB cable
from your PC to fi nalise activation of TurboUSB.