Blaupunkt Acapulco MP54 - Manual (Page 20)

63
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Note:
●
If the device was switched off be-
fore you inserted the CD, you will
first have to switch on the device
by pressing button
1
in order to
start playing the CD.
●
If a CD is already inserted in the
drive,
➮
press the SRC button
@
repeated-
ly until “CD” appears in the display.
Playback begins from the point at which
it was last interrupted.
Selecting tracks
➮
Press one of the arrow buttons
7
to select the next or previous track.
If you press the or button
7
once,
the player will play the current track
again from the beginning.
Fast track selection
To quickly select tracks backwards or
forwards,
➮
press and hold down one of the /
buttons
7
until fast-reverse /
fast-forward track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
➮
press and hold down one of the
buttons
7
until fast searching
backwards / forwards begins.
Random track play (MIX)
➮
Press the 4 MIX button
;
.
“MIX CD ON” appears briefly in the dis-
play and the MIX symbol lights up. The
next randomly selected track will then
be played.
Cancelling MIX
➮
Press the 4 MIX button
;
again.
“MIX CD OFF” appears briefly in the
display and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks
on the CD.
➮
Press and hold down the OK but-
ton
:
for longer than two sec-
onds.
The next track will then be scanned.
Note:
●
You can set the scanning time. For
further information, please read the
section entitled “Setting the scan-
ning time” in the “Radio mode”
chapter.
Cancelling SCAN and continuing
listening to a track
➮
To stop scanning, press the OK
button
:
.
The currently scanned track will then
continue to be played normally.
CD MODE