Philips DVDR615-17B - Manual (Page 79)

67
How to change or delete a programmed
recording (TIMER)
1 Switch on the TV. If required, select the channel number for the
DVD Recorder (channel 3 or 4).
2 With the Recorder on, press TIMER on the remote control.
The programming method selected last is marked.
3 Select 'Timer List' using CH- B or CH+ A and confirm with
C .
Timer
Timer List
Date
01/22
--/-- Ch.
01
----- Start
04:25PM
--:-- End
06:05PM
--:--
Rec
Mode
M2
---
Total record time: 01:40
To change
Press › To exit
Press TIMER
4 Select the programmed recording (TIMER) you want to check,
change, or delete with CH-
B or CH+ A .
Delete programmed recording
1 Press the CLEAR button.
2 Confirm with OK . 'Timer Cleared' will briefly appear on the TV
screen.
'--' appears rather than the displayed values
3 To end, press TIMER .
Tip
5 Press C .
Select the entry field with D or C .
If required, change the information with CH+ A , CH- B or
the number buttons 0..9 .
6 In 'Date', you first enter the month and then the date.
7 Confirm with OK .
8 To end, press TIMER .
9 Switch off with STANDBY m .
ENGLISH
Programming a recording (TIMER)