Behringer EPA40 - Manual (Page 5)

5
EUROPORT EPA40
Connect the supplied BEHRINGER XM1800S microphone to the MIC IN input.

Never hold the microphone directly in front of the loudspeaker. Feedback hazard! When
operating the device, keep the microphone behind the loudspeaker to avoid feedback.
You can connect an external sound source (CD player, MP3 player, etc.) to the LINE IN input.
Fig. 2.1: Side view of the EPA40
Connect to the power supply via the polarized DC IN connector. A fitting power adapter is supplied.
Use the device only with the included power supply.
COMPARTMENT FOR BATTERY AND SHOULDER STRAP. To insert the battery, open the
compartment’s cover. The bottom half of the compartment is used for the battery. Open the latch to
access the battery compartment.
Insert the battery as follows: The terminals must face the device with the positive terminal (red) on
the side of the EPA control panel (to the left, as seen from the rear panel). Insert the battery and
close the latch. Close the battery compartment.

Insert the rechargeable battery with the terminals connected to the correct polarity.
The device's SERIAL NUMBER is found on the bottom side of the unit.
2. CONTROL ELEMENTS AND CONNECTIONS