Philips SHB6000-28 - Manual

Quick start guide
Philips Bluetooth stereo headset SHB6000
EN
Exchangeable ear caps
Power on/off
Mic
LED
Adjustable ear hook
Charging socket
Charge the headset
1
Remove the USB cap.
2 Plug the headset into a powered
USB port with USB charging cable.
Get the best fit
1
Choose the earbuds that best fit for your ear canal.
2
Gently blend the earhook to fit into your ears.
3
Adjust the rubber part of the earhook to the height
that you feel fit.
4
Twist the earbuds to the right position for best fit and
noise isolation.
Please refer to www.philips.com/welcome for full user manual.
Pair the headset with your mobile phone
1 Ensure that the mobile phone is turned
on and its Bluetooth feature is activated.
2 Ensure that the headset is charged and
turned off.
3 Press until the LED starts flashing red
and blue alternately. Do not stop pressing
the button after seeing the blue LED only.
» The headset is in pairing mode, which
lasts five minutes.
4 Pair the headset with the mobile phone.
For details, refer to the user manual of the
mobile phone.
Settings Connectivity
Select
Back
Enter Password
Settings
Devices Found
Select
Back
Philips SHB6000
Settings Connectivity
Bluetooth
Select
Back
Add
Bluetooth
device
The PIN code ''0000''
is not required for
some mobile phones.