BT A6 User Manual
Page 15
15
Freeway [A6] ~ 2nd Edition ~ 15th October ’01 – 4166
To listen for and talk to another
handset user
If another handset user is calling, you will
hear a 2 second ringing tone to alert you
that they are going to speak.
You will then hear them speaking to you.
The
icon will be shown on the display to
indicate that you are receiving a call. (You
may need to adjust the volume, see p12).
When the other handset user has finished
speaking you can respond to the call,
press and hold the TALK button, then hold
the handset about 3 inches (7
1
⁄
2
cm) from
your mouth and speak into the microphone.
The transmission icon will be shown on
the display.
Release
the TALK button when you have
finished speaking.
Talk
Talk
Battery saver mode
If there are no transmissions for 10 seconds your
BT Freeway will automatically switch to battery
saver mode. This is indicated by a flashing
icon on the display.
If any incoming or outgoing calls are made the
handset will return to standby mode.
STANDBY