Philips DCP750-37 - Manual

Connecting and
using your iPod
player
1 Pull out the iPod
connector.
2 Dock your iPod player
with the top
entering first as
shown.
3 Push in the iPod
connector.
This portable DVD player is designed with
a built-in lithium battery to supply power
to the player when you are on travel.
1 Slide the POWER switch to the OFF
position.
2 Connect the supplied power adaptor cord
(or the car adaptor) to the player and AC
mains (or the car cigarette lighter outlet)
to start charging.
➜ The CHG indicator turns on.
3 Disconnect the power adaptor cord (or
the car adaptor) when the CHG indicator
turns off.
Notes:
– You can also connect the supplied power
adaptor cord (or the car adaptor) to the player
and AC mains (or the car cigarette lighter outlet)
directly wherever possible.
– Before using the DVD player for the first time,
make sure to charge the battery for 8 hours at
least.
Charge 1
Quick start guide
Docking Entertainment System
DVD Portable with dock for iPod
3 OPEN HERE
DCP750/850
2,3
1
OR
1 Lift up the handle marked /
EJECT to take out the
remote control.
Prepare your remote
control 2
2 Remove the protective plastic
tab (first time users only).
➜ Your remote control is
now ready for use.
1
SOURCE
4 Switch on your iPod player to set "TV
OUT" to "ON" and select the "NTSC"
mode. (See your iPod user’s manual for
detailed operation.)
3 Enjoy (iPod with video)
Notes:
– This DVD player only supports 30G, 60G and
80G iPod player with video.
– Please take out the tab marked “for 30G iPod” in
the dock if you want to dock a 60G or 80G iPod
player.
– You need to press
2; on your iPod player in
order to start photo playback through this DVD
player.
VIDEO
2
3
5 Press the SOURCE key
repeatedly (or DOCK on the
remote) for dock input.
6 Play files in your iPod player.
● To recharge your iPod player:
Case 1: In the power-off mode, you just need to
connect the DVD player to AC mains or the car
cigarette lighter outlet.
Case 2: In the power-on mode, make sure the
current source of the DVD player is “DOCK”
before proceeding as described in case 1.
To remove the iPod player
1 Pull out the iPod connector.
2 Lift up the handle marked
/ EJECT to release.
5
SOURCE
2
1
DCP750/850 QSG-2.qxd 2006.11.30 9:19 Page 1