BRK electronic CSA6.19 - Manual

ALARM RELAY
Activates auxiliary devices from smoke,
CO and/or heat alarm signal.
SMART
INTERCONNECT
Works with all First Alert and BRK
“Smart Interconnect” CO Alarms.
MEETS UL
STANDARDS
UL217, UL2034 and UL539 for accessories.
MEETS ULC
STANDARDS
ULC S-531, CSA6.19 and
ULC S-530 for accessories.
FITS IN MOST
STANDARD
ELECTRICAL BOXES
CAT.
RM4
120V AC, 60Hz Wire-in
Designed to activate an auxiliary device when an alarm is initiated. The RM4
Relay is intended for use with BRK and First Alert Smoke, Heat and Carbon
Monoxide Alarms. The relay contacts will activate whenever any interconnected
alarm sounds. The relay contacts will automatically deactivate a few seconds
after the alarm stops sounding. The RM4 may be wired next to an AC alarm or
from a remote location. This relay must be installed in a junction box.
Interconnects smoke alarms, carbon monoxide alarms and heat alarms with:
• Lights
• Bells
• Door Closers
• Sirens
• Exit Signals
• Escape Lights
• Exhaust Fans
• Other Auxiliary Devices
R EL A Y