Philips SHE9850-27 - Manual (Page 2)

Issue date 2012-07-31
Version: 5.0.8
12 NC: 8670 000 37505
UPC: 6 09585 15027 0
© 2012 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com
Highlights
SHE9850/27
In ear headphones
Advanced Acoustic
Specifications
High definition transducer
The motor of the receiver comprises of a coil, a
metal u-shaped armature, a pair of permanent
magnets, as well as a drive rod and a diaphragm.
Electromagnetic currents alter the armature's
polarity up or down, moving the drive rod and
diaphragm to generate sound output. The receiver
components have been fine-tuned to produce
greater output at lower frequencies while boosting
the peaks at higher frequencies. The result is crisp,
detailed and transparent audio with extended
precision highs.
Precisely tuned acoustics
Perfect in-ear seal of these earphones surprises you
with exceptional noise isolation.
Angled acoustic design
Derived from a thorough understanding of the
anatomy of a human ear canal, the Angled Acoustic
design adjusts the angle of the speaker tube and ear
bud to individual ear canal shapes. Besides delivering
sound directly to your ears, it also creates a perfect
seal from ambient noise that enables you to listen to
your music at lower volume levels.
Angled acoustic fit
Derived from a thorough understanding of the
anatomy of a human ear canal, the Angled Acoustic
design adjusts the angle of the speaker tube and ear
bud to individual ear canal shapes. It fits your ears
naturally.
3-size ultra-soft silicon caps
The 3 sizes of ultra-soft silicon caps of these Philips
earphones sit comfortably in your ears without
adding pressure to them whilst blocking out
unwanted noise.
Tight sealing foam sleeves
Made from slow recovery foam, this pair of sleeves
is a comfortable alternative to the rubber ear caps.
A snug seal is created by these foam sleeves when
they are compressed between the fingers before
being inserted into the user's ear canal. After the
earphone is held in place for a few seconds, the slow-
recovery foam expands to create a secure and tight
fit.
Premium metal housing
Housed in superior metal, these earphones are
shielded from unnecessary vibration for accurate
sound transmission, resulting in smooth bass
response and clear mid-to-high range tones.
Sleek metal carrying case
Made of high-quality metal with a luxurious touch,
the compact carrying case incorporates a cable bank
which provides an easy solution for neat cable
winding and headphone storage. It even includes a
storage compartment for the foam sleeves. The hard
case exterior also provides additional protection for
the headphones while not in use.
Symmetrical cables
These headphones have symmetrical cables to
prevent them from tangling, and hence provide for
easy listening.
Flexi-grip design
The soft flexi-grip material that the body of the
headphone is sheathed in enhances its performance
and extends its durability. It protects the cable
connection from damage that otherwise could occur
due to repeated bending of the headphone body
from frequent contact with the user's fingertips
when being put on and removed.
Sound
• Impedance: 12 ohm
• Sensitivity: 115 dB SPL/mW at 1 kHz
• Maximum power input: 3 mW
• Frequency response: 20 - 20 000 Hz
Connectivity
• Cable length: 1.2 m + 1.8 m
Packaging dimensions
• Packaging dimensions (W x H x D):
17.5 x 17.5 x 4.1 cm
• Nett weight: 0.015 kg
• Gross weight: 0.3365 kg
• Tare weight: 0.3215 kg
• Number of products included: 1
• Packaging type: Blister
• UPC: 6 09585 15027 0
Outer Carton
• Outer carton (L x W x H): 28.6 x 20.4 x 24.5 cm
• Nett weight: 0.09 kg
• Gross weight: 2.736 kg
• Tare weight: 2.646 kg
• GTIN: 2 06 09585 15027 4
• Number of consumer packagings: 6
Inner Carton
• Inner carton (L x W x H): 18.4 x 13.2 x 21.3 cm
• Nett weight: 0.045 kg
• Gross weight: 1.163 kg
• Tare weight: 1.118 kg
• GTIN: 1 06 09585 15027 7
• Number of consumer packagings: 3
•