BUSH High Definition Digital Set Top Box with DAB+ Receiver DFTA52DAB - Manual (Page 13)

12
First Time Installation
Note: Be sure to turn on the main power at the front of your Set Top Box before operating.
After all the connections have been made, turn on your TV. Make sure that the Set Top Box is
connected to the main power and switched on. If you are using the Set Top Box for the first time or
have conducted a factory reset, a First Time Installation guide will be displayed to assist you in
setting up your Set Top Box correctly. Follow the prompts as requested.
The First Installation Guide will begin to conduct a station scan automatically. When scanning has
finished, all active channels will be stored automatically. The last found channel will begin to play. If
you wish to stop scanning, Press the EXIT Button and you will exit and stop the initial scan. The
channels already found will be stored.
If you accidentally skip the First Time Installation screen, you can Press the MENU Button to select
the Main Menu and refer to page 14 for operation guide.