Connecting the antenna and gettingstarted, Connecting the antenna and getting started 1 – Philips 32HFL5763D-F7 User Manual
Page 7
Advertising
7
EN
Connecting the antenna and getting
started
1
Connect the RF signal to the TV.
2
Plug the power cord into the power outlet.
40HFL5783D, 40HFL5783L
Cable
32HFL5763D, 32HFL5763L
Cable
3
Turn the TV on.
•
Press . POWER at the side of the TV or use the
.
(POWER) on the remote control.
•
Press those buttons again to put the TV in standby mode.
The TV is not powered off completely unless it is physically
unplugged.
40HFL5783D, 40HFL5783L
32HFL5763D, 32HFL5763L
Advertising
This manual is related to the following products: