Philips Blu-ray Surround Base HTB3525B 2.1 CH Integrated subwoofer Bluetooth® and NFC HDMI ARC Blu-ray Disc playback - Manual (Page 27)

25
English
EN
Speaker settings
1
Press .
2
Select [Setup], and then press OK.
3
Select [Advanced], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [Enhanced audio]: Select [On] to
enable audio post processing at the
speaker and enable karaoke settings
(if your product supports Karaoke).
To play the original audio of the disc,
select [Off].
Tip
• Enable audio post processing before you select a
predefined sound mode (see 'Sound mode' on page
21).
Restore default settings
1
Press .
2
Select [Setup], and then press OK.
3
Select [Advanced] > [Restore default
settings], and then press OK.
4
Select [OK], and then press OK to
confirm.
» Your Blu-ray Surround Base is reset
to its default settings except for some
settings such as parental control and
DivX VOD registration code.
7 Update software
Philips continually tries to improve its products.
To get the best features and support, update
your Blu-ray Surround Base with the latest
software.
Compare the version of your current software
with the latest version on www.philips.com/
support. If the current version is lower than the
latest version available on the Philips support
website, upgrade your Blu-ray Surround Base
with the latest software.
Caution
•
Do not install a lower version of software than the
current version installed on your product. Philips is not
liable for problems caused due to software downgrade.
Check software version
Check the version of the current software
installed on your Blu-ray Surround Base .
1
Press .
2
Select [Setup], and then press OK.
3
Select [Advanced] > [Version
information].
» The software version is displayed.
Update software through
USB
What you need
• A USB flash drive that is FAT or NTFS-
formatted, with at least 256MB of memory.
Do not use a USB hard drive.
• A computer with Internet access.
• An archive utility that supports the ZIP file
format.