Brinkmann Window Pane Pagoda 822-2509-2 - Manual (Page 5)

Step 1
Attach the ground stake to a pointed
connector. Push approximately 3" of the
ground stake into the ground. If the
ground is too hard, soak area with
water to soften.
Step 2
Attach light head to ground stake adaptor by
inserting tabs on adaptor into slots in
bottom of light head. Twist adaptor
clockwise to fasten.
Step 3
Insert light head into ground stake. The
photocell light sensor should point away
from other nighttime light sources.
Step 4
For optimum performance, it is best to
charge the solar light for a FULL, SUNNY
DAY. The light will turn on automatically at
night. The Ni-Cd rechargeable battery
provides increased brightness and stays on
longer as it cycles over time (days and
nights of charging and discharging). The
more direct sunlight that the light receives
during the day, the brighter and longer the
light will stay on at night.
4
Ground Light Assembly
INSTR_Window Pane-SG.qxd 12/23/03 9:28 AM Page 5