Assembly of stick blender, Assembling the bravetti do it all 2 stick blender – Bravetti DO IT ALL 2 EP558 User Manual

Page 6

Advertising
background image

7

4

* Only process very soft, tender pieces of food.
* Food pieces should not be larger than ¾-inch cubes.
* Do not fill the processor bowls more than half way with very soft, tender foods

like cooked apples or tomatoes. When pureeing foods like cooked vegetables,
soft cheese, or cooked poultry, only add a few pieces at a time so that the Stick
Blender does not jam. In fact, it is always best to batch feed when using the
Stick Blender/Chopper.

* Avoid pureeing foods like citrus fruits or other foods that have a lot of fiber or

hard, tough skin which can jam the appliance.

* If the Stick Blender should jam during use and the blade stops turning, stop

operation and unplug the unit from the power source. Disassemble the unit
to remove any food that is jammed.

Caution: Never put your fingers or any utensils in the Stick Blender/Chopper

during operation.

Warning: This appliance is designed for intermittent use. Maximum running

time with the Stick Blender/Chopper is 15 seconds. Allow unit
to cool before resuming use. Best chopping results are achieved by
using 2-3 second bursts.

Achieving best results with the Bravetti Do It All 2

Stick Blender/Chopper

Important: To mince meat, cut the meat into 1/2” cubes and do not mince

more than 6 oz. At one time. Make sure that the meat, fish or
poultry is fully defrosted and that all bones and gristle have
been removed. Allow cooked food to cool before placing in
the chopping bowl.

Assembling the Bravetti Do It All 2 Stick Blender:

Make sure that the unit is unplugged from power source before attaching
or removing the Stick Blender attachment.

1.

Line up arrow of Stick Blender attachment with arrow on power pack. Once

fully inserted, rotate stick blender attachment clockwise 90º until arrow on
power pack aligns with square on Stick Blender.

Warning: This appliance is designed for intermittent use. Maximum

running time with the Stick Blender is 1 minute. After this
time, allow the unit to cool.

2.

Plug the cord into an electrical outlet (120V~ / 60Hz).

Caution: To avoid splattering, place the Stick Blender attachment

first in the food to be beaten or chopped, then press the button.
Always release the button before removing the Stick Blender
from the food, especially when using the Stick Blender in hot
liquids. Always hold the Stick Blender with your hand while
processing. Never leave unit unattended.

Caution: Do not use the Stick Blender on the stove. If you want to use it

in a saucepan while cooking, you must first remove saucepan
from the stove.

3.

Use the measuring beaker/cup with the Stick Blender or you can use another

container. The measuring beaker/cup is intended only for processing small
quantities with the Stick Blender.

Caution: To remove the Stick Blender attachment from the power pack,

first unplug the power pack and only then turn the Stick Blender
90º counterclockwise and pull it off.

Assembly of Stick Blender

Advertising