Bosch GSM-Com 608 - Manual (Page 30)

PHONE SETUP
30
Preferred list
The list of networks on your SIM card defines the
order of preference in which your phone will se-
lect a network in automatic mode. Network ope-
rators offer different services and call charges;
therefore it may be beneficial for you to make a
preferred list of your own. Enter the individual
networks in your own order of preference and
store them on your SIM card.
To do this, you must access the Selection of net-
work sub menu, select the Set preferred list op-
tion and use
to select the empty location in
which you want to store the new network.
Pressing
EDIT will give you a list of available
net-works. Scroll through the list using . When
you see a network you wish to store in your pre-
ferred list, just press
OK . If you select a currently
used location and press EDIT , the former occu-
pant can be deleted when you enter the new one.
Just press
EXIT to leave the list as it was.
Once a network is stored in the preferred list, you
can always see the country and network code of
the actual network by pressing
EDIT in the Set
preferred list option.
Power saving
To save your battery and thus increase both
conversation and standby times you can select
whether you want the display contents to be
visible or not in standby mode.
Select
Display remains on if you want it
to be visible, and Display switches off
if you want it not to be visible. The display will
switch off after 3 minutes in standby mode.
In standby mode the display and keypad backlight
will always switch off after 10 seconds if your tele-
phone is set to
Backlight on . However, you
have the option of having the backlight switched
off permanently by selecting
Backlight off .
Car kit installation
This option is only effective if the phone is con-
nected to a handsfree car kit. See page 36 for
more information.
Welcome greeting
You can change the welcome greeting of your
phone according to your own wishes. Delete the
old message by holding
CLEAR , enter the new
greeting via the keypad and confirm by pressing
OK .
Speed dialling
To speed dial using your location numbers, you
have to select
Speed dialling on . If you
do not want to make use of this feature, select
Speed dialling off .
Any key answer
You can answer an incoming call by pressing any
key you like except for the left function key and
the arrow keys if you select
Any key answer on .
Factory settings
You can always return to the original setup of
your phone. The phone is set up by the manu-
facturer as follows:
Language: Automatic
Autoredial: Off
Network: Automatic
Power saving: Display on
Backlight on
Car kit: Auto answer off
Auto power off on
Greeting: Welcome
Speed dialling: On
Any key answer: Off
GSM-COM 608 GB 28/04/99 12:30 Side 30