Connect/setup, Set up wi-fi connection between center and station – Philips WACS700-37B User Manual

Page 3

Advertising
background image

1

3

2

6

A

Set up Wi-Fi connection between Center and Station

The first time you set up the Wi-Fi connection, place
WAC700 Center and WAS700 Station side by side
on a flat and firm surface.

Connect WACS700 to power supply, first the Center and then the
Station
Center/Station: • The screen lights up

Auto installation/connection starts

• When the installation/connection is completed,

both Center & Station will enter HD(Harddisk)
mode (see screen illustration at the right)

(Make sure you have powered up the Center before powering up Station)

Finally, to relocate Center and Station as you desire:
• Simply unplug your Center or Station and power them up

in different rooms

• You will be able to playback music stored in the HD to both the

Center and the Station

Connect/Setup

Center

Station

AC

AC

HD mode (Harddisk)

IMPORTANT!
• Avoid thick walls. Separating your Center and Station by 2 or more

walls may cause poor streaming connection.

• Keep your Center and Station away from the source of interference,

for example: plasma TVs, microwave ovens, DECT phones, bluetooth
devices, cordless phones, other Wi-Fi products.

• For best streaming connection, adjust the location of your Center and

Station according to the reception status of Wi-Fi signals

: indicates maximum reception;

: indicates minimum reception

• For wall mounting, please refer to the User Manual, Appendix:

How to mount your Center and Station onto walls. You may
need assistance from the qualified service personnel.

Advertising
This manual is related to the following products: