Philips 10000071 - Manual (Page 24)

INSTALLATION / CIRCUIT LOADING
Turn the knob countercloc-
kwise to start loading the
circuit.
Fill the tank with fresh drin-
king water.
Move the ON/OFF switch to
“I” to turn on the machine.
Fill the coffee bean con-
tainer with coffee beans.
Check that all components
are correctly placed.
Turn the knob clockwise to
terminate the circuit-load-
ing process.
See rating plate
Check the dater on “Aqua Prima” fi lter; if fi lter is past its
date, replace it with a new one.
The “Aqua Prima” fi lter can
be installed (see pg.31).
(Optional; it can be pur-
chased separately).
The messages displayed by the machine during operation are shown
on page 34.
Important warning for using the “Aqua Prima Filter” can be found at
page 35.
Flashing
Steadily lit
Insert the plug into a sui-
table electric socket.
The machine is warming
up; lights are fl ashing.
Place a glass under the
cappuccinatore.
Wait until water fl ows
steadily from the cappuc-
cinatore.
Remove the glass. When the indicator lights
are fi xed, the machine is
ready for use.
Note: You must load the circuit before starting up
the machine for the fi rst time, if it has been inopera-
tive for a lengthy period or if the water tank has been
completely emptied. The circuit must also be loaded
each time the light fl ashes:
24